WerkMaster™ Style Tooling

No. These are World Diamond Source tools built to fit WerkMaster™ machines, which is why they are described as WerkMaster™ style. We manufacture the diamond tooling ourselves and sell it factory-direct at wholesale, so it is an alternative to OEM tooling rather than an OEM part.

Single segments and double segments in metal bond, resin pads, resin/metal hybrid pads, and PCD tooling for coating removal in left and right turn, thick and thin coating versions. That covers the full sequence from stripping a coating through grinding to polishing on the same machine.

Metal-bond segments in 2X extreme soft bond (yellow), medium bond (black) and hard bond (red), in 16/20, 30/40, 60/80 and 120/150 grit. Resin pads in 50, 100, 200, 400, 800, 1500 and 3000 grit, plus resin/metal hybrid pads in 50, 100 and 200 grit for the transition steps.

Inversely to the concrete: soft bond on hard concrete so fresh diamond keeps exposing, hard bond on soft or abrasive concrete so the segment does not wear away. Our color coding makes it quick on site, with yellow as extreme soft bond, black as medium bond and red as hard bond. Getting it backwards is the usual reason tooling either glazes over or disappears in an afternoon.

They bridge metal bond and resin. A hybrid cuts more like a metal-bond tool while leaving a finish closer to a resin pad, which makes the transition steps between grinding and polishing far less painful. Use them at 50, 100 and 200 grit where the scratch pattern from metal bond has to be worked out before the resin sequence.