Cup Wheel for HILTI®

They are 6" wheels built to the mount and guard dimensions of Hilti® grinders, so they seat correctly in a machine where a generic 6" wheel often will not fit inside the guard. These are World Diamond Source tools made to fit those machines, not Hilti® OEM parts.

A spike-segment wheel and an L-segment wheel, both 6". The spike segment concentrates contact into points, so it bites hard and is the more aggressive of the two for coatings and high spots. The L-segment spreads contact over more diamond, which cuts a little slower but leaves a more even surface and lasts longer on general concrete grinding.

Hand grinding concrete: knocking down high spots, taking off trowel and form marks, prepping a slab for coating and working areas a floor grinder cannot reach. They are removal tools, so follow with a finer cup wheel or a grinding disc when the surface has to end up smooth.

Not reliably, and that is the point of the category. Guard clearance and spindle mount differ between makes, and forcing a wheel that does not seat properly is unsafe. Call us at 800-611-8278 with your grinder make and model and we will point you at the right wheel from our wider cup wheel range.

Hand grinding is normally dry. Dry grinding concrete produces respirable crystalline silica quickly, so run a dust shroud with a vacuum rated for silica, or wet the surface where your setup allows. OSHA's silica standard sets out the dust controls expected for hand-held grinding on concrete.